Clear Polycast Acrylic Sheet
What is Clear Acrylic?
Acrylic, polymethyl methacrylate, is the first choice in any light transmitting application. Acrylic offers superior clarity (92% light transmission for colorless material), and excellent weatherability (acrylics do not yellow when exposed to sunlight). Acrylics are UV stabilized and provide high resistance to breakage (17 times that of double-strength glass). Because of these characteristics, acrylics are ideally suited for all types of outdoor environments. Additionally, acrylics will not warp, crack, craze, or corrode when subjected to prolonged outdoor exposure.
Acrylic also offers exceptional stiffness and intermediate toughness. This thermoplastic material, first introduced in 1937, is now offered in molding and extrusion cubes, fine powders, film, sheet, rods, tubes, blocks, and light-conducting filaments. There are two basic classes f acrylics: unmodified and modified.
The unmodified acrylics have almost unlimited color possibilities and are stiff and tough compared to glass. Their resistance is outstanding against radiation from mercury-vapor, fluorescent, and incandescent lamps. Service temperatures range from -40 degrees F to + 240 degrees F. Dimensional stability is excellent, although, like other thermoplastics, Acrylics have large thermal coefficients of expansion. In the use of very large parts, or under extremes of temperature, provisions for expansion and contraction must be made.
Modified acrylics are acrylics that have the addition of impact modifiers, by physical blending and by copolymerization. Properties of greater toughness and better solvent resistance are imparted by modification of the basic material.
"Properties", Applications" and "Availabilities" for the Clear Acrylic Sheet are at the bottom of this page.
Fill out the form(s) below and "Add Order to Cart".
Click here to contact us and we will respond to your inquiries as soon as possible.
ORDERS ARE SUBJECT TO CONFIRMATION
Minimum $75.00 for internet orders. Orders less than $75.00 will be charged a $25.00 service charge.
The price given on this page is a material quote only. It does not include the additional shop processing fees.
Looking for a Uniquely Cut Item, other sizes? Email us here and we will respond to your inquiry as soon as possible.
CONDITIONS OF SALE
Properties, Applications and Availabilities for the Clear Acrylic Sheet
|Unusual optical clarity||Displays||Rod: .062" to 4.000"|
|High tensile strength||Models||Tubing: .062" I.D. to 15.000" O.D.|
|High resistance to heat distortion||Signs||Sheet: .030" to 4.250"|
|Outstanding weatherability||Furniture components||Specification:|
|Good electrical properties||Lenses||L-P-391A or colored Acrylic, click here|
|Electrical and electronic parts||Clear Import Acrylic, click here|
|• View Acrylic MSDS Sheet|
|• View Acrylic Data Sheet|
Polycast Acrylic Sheet Meets the Test Requirements of:
ANSI Z97.I (American National Standards Institute Specification):
defines performance criteria for safety glazing used in buildings, concerning impact hardness and degredation after accelerated weathering. Polycast acrylic sheet in thicknesses greater than 0.099 are certified as complying.
ANSI Z26.I AND FMVSS 205 (Federal Motor Vehicle Safety Standard):
define performance characteristics of safety glazing of passenger cars, trailers, trucks, buses and motorcycles, including (but not limited to) impact resistance, chemical resistance, abrasion resistance, flammability, weathering and optics.
NSF Grade Sheet:
Polycast offers an acrylic sheet which meets the requirements for the National Sanitation Foundation.
Food and Drug Administration's regulations concerning food contract applications as described in 21 CFR 177.1010 for all food types, including alcoholic beverages in room temperature or refrigerated applications.
Dade County Approval:
Approved under Section 203 and 204 of the South Florida Building Code governing the use of Alternate Materials and Types of Construction.
Underwriters Laboratories recognized for flammability* of plastic materials for parts in devices and appliances. Polycast acrylic is recognized under UL 94HB, with some exceptions.
Underwriters Laboratories classified for surfaces burning characteristics of a building material. Polycast acrylic 3/8 inches and greater is classified with the following test values: flame spread = 140; smoke developed = greater than 500.
Underwriters Laboratories recognized for polymeric materials in electrical applications. Contact inside sales for further information.
Underwriters Laboratories listed for bullet-resisting equipment. Polycast offers the following in clear and bronze:
• Level 1, MP 1.25, SAR MP 1.25 Medium power, small arms resistant.
• Level 2, SAR HP 1.25 High power, small arms resistant.
• Level 3, SP 1.25 Super power, small arms resistant.
FAR 25.853 (Federal Aviation Regulation)
defines the flammability requirements for acrylic windows and signs for aircraft interiors. Polycast sheet .049" and greater meets this requirement.
FMVSS-302 (Federal Motor Vehicle Safety Standard)
defines burn rates of interior materials for passenger cars, trailers, trucks and buses. All Polycast materials meet this standard.
ASME PVHO-I and MIL-C-24449
defines the requirements for materials used in the fabrication of windows for service in pressure vessels for human occupancy. Polycast material meets these requirements.
Shipboard application of illumination and signal lighting. Defines the requirements of the material intended for use in the fabrication of lighting fixtures for Naval service. Among the associated tests are flammability, deflection temperature, flexural strength, impact strength and optical properties. Polycast material meets these requirements.
City of New York, Dept. of Buildings:
Accepted for use, City of New York, Department of Buildings, as glazing material in lieu of glass in non-rated windows, doors and in skylights in sheet thicknesses up to 3/8" maximum, and for ground, wall and roof sign combustible material, where permitted by Code. File number MEA 80-82-M.
City of New York, Board of Standards and Appeals:
Approved for use in safety glazing applications. Calendar number 1997-61-SM.
Polycast acrylic sheet .080 and greater complies with the requirements of the Consumer Product Safety Act and the CPSC Safety Standard of Architectural Glazing materials, 16 CFR 1201 for both Category I and Category II.
Polycast Acrylic Sheet Conforms to the Following Specifications (Current Edition)
defines physical properties which acrylics should meet or exceed, such as tensile strength, refractive index, specific gravity, deflection temperature, and impact strength. Polycast acrylic sheet meets or exceeds the requirements for all types of grades of sheet of this specification.
A specification covering monolithic methacrylate sheet produced by the cell-cast method. Polycast acrylic sheet in thickness .030-4.250 meets or exceeds the requirements for Category A-1, finish 1, 2, 3; Types UVA & UVT.
An S.A.E. material specification referencing specific Federal quality standards and ASTM test methods. Polycast acrylic sheet in thickness 0.030-4.250 meets or exceeds the requirements for item A, Type I, II and III, Grade A, B or C.
military specification covering modified acrylic (specially designed for superior resistance to chemical attack). Materials supplied for conformance to this specification are Polycast Poly-76® and Poly-84® (available in both Type I and II and Class 1 and 2). All products are on the Qualified Products list for this Mil-Spec.
military specification covering stretched acrylic sheet specially designed from Mil-P-8184 base material. It offers enhanced craze properties and increased crack resistance. Material supplied for conformance to this specification is identified as Poly 2000™.
military specifications covering heat-resistant, preshrunk, clear, and colored acrylic sheet. Material supplied for conformance for this specification is identified by the name POLY II®. Polycast is qualified to furnish sheets in thickness 0.060-1.000 to meet this specification.
There are many more standards, codes, and specifications to which Polycast can demonstrate compliance. Inquiries regarding your particular problems or requirements should be directed to the Polycast Marketing Department. Call 1-800-243-9002 or email firstname.lastname@example.org.
*This term and any corresponding data refer to typical performance in the specific tests indicated and should not be construed to imply this material's behavior under actual fire conditions.